Synology reminders

Just some reminders for myself where those pesky config files are hidden

/etc/exports

/volume1/video/bla   *(rw,async,no_wdelay,no_root_squash,insecure,anonuid=0,anongid=0)

exportfs -ra

 

192.168.X.X:/path/to/nfssharefolder             /media/nfs-foo     nfs     defaults,user,auto,noatime,intr   0 0

sudo service nfs-common start

CNC fix started

CNC was getting a bit sloppy (inaccuracy of about 0.5 mm) so I had to do some rebuilding because my current solution doesn’t have any adjustment possibilities.

Just made this on the lathe. Shaft is now 7mm so I can make my own collars and the end is 6.5 for the shaft coupler.

I’ve tested the direct drive setup and it allows speeds about 3-4 times compared to the old setup. That’s good because I’ll need that speed with one of my other projects:

This should be a part of my extruder. Already has a 3mm hole for 3mm filament. Most of the metal will be removed to create cooling ribs. Bottom will probably have an M8 thread to attach a couple so I can attach various nozzles.